基于跨临界CO2热泵的茶叶生产能源系统负荷削减潜力

乡村产业中的化石能源设备逐渐被电能技术替代，引起了乡村负荷波动增大、部分时段产生集中高负荷的问题。为了解决以上问题，将低品位清洁能源应用至乡村的茶叶生产中，针对烘茶全过程的工艺要求提出了跨临界CO₂热泵烘茶技术；并以某茶叶生产乡村为对象，对其代表台区的全年日用电量及产茶日负荷进行了分析，得出采用CO₂热泵烘茶后其负荷得到大幅度削减，整体可降低至原负荷的39.6%~46.8%，峰值负荷与平时负荷的比值由原本的13.6降至5.4~6.2。跨临界CO₂热泵应用至农产品生产中可有效缓解乡村供电压力。     

Bench-scale bubbling fluidized bed systems around the world - Bed agglomeration and collapse: A comprehensive review

Thermochemical conversion by gasification process is one of the most relevant technologies for energy recovery from solid fuel, with an energy conversion efficiency better than other alternatives like combustion and pyrolysis. Nevertheless, the most common technology used in the last decades for thermochemical conversion of solid fuel through gasification process, such as coal, agriculture residues or biomass residues are the fluidized bed or bubbling fluidized bed system. For these gasification technologies, an inert bed material is fed into reactor to improve the homogenization of the particles mixture and increase the heat transfer between solid fuel particles and the bed material. The fluidized bed reactors usually operate at isothermal bed temperatures in the range of 700–1000 °C, providing a suitable contact between solid and gas phases. In this way, chemical reactions with high conversion yield, as well as an intense circulation and mixing of the solid particles are encouraged. Moreover, a high gasification temperature favours carbon conversion efficiency, increasing the syngas production and energy performance of the gasifier. However, the risk of eutectic mixtures formation and its subsequent melting process are increased, and hence the probability of bed agglomeration and the system collapse could be increased, mainly when alkali and alkaline earth metals-rich biomasses are considered. Generally, bed agglomeration occurs when biomass-derived ash reacts with bed material, and the lower melting temperature of ash components promotes the formation of highly viscous layers, which encourages the progressive agglomerates creation, and consequently, the bed collapse and system de-fluidization. Taking into account the relevance of this topic to ensure the normal gasification process operating, this paper provides several aspects about bed agglomeration, mostly for biomass gasification systems. In this way, chemistry and mechanism of bed agglomeration, as well as, some methods for in-situ detection and prediction of the bed agglomeration phenomenon are reviewed and discussed.     

Large eddy simulation of a 660 MW utility boiler under variable load conditions

Large eddy simulation (LES) has become a promising tool for pulverized coal combustion with the development of computational fluid dynamics (CFD) technologies in recent years. LES can better capture the unsteady features and turbulent structures of coal jet flame than Reynolds averaged Navier Stokes (RANS). The coal-fired power plants in China are now required to be operated in a wide load range and quickly respond to the electric grid. The boiler performance of variable loads should be evaluated in terms of flow, heat transfer, and combustion processes. In this paper, LES was applied to simulate a 660 MW ultra-supercritical boiler under BMCR (boiler maximum continue rate), 75%THA-100, and 50%THA-100 conditions. The predicted gas velocities agree well with the thermal calculation and the temperature error is less than 130 K. The simulation results show that the operation load has significant effects on the boiler performance. It is also proved that LES can provide guidance for the design and operation of advanced coal-fired boilers.     

Dynamic load-altering attack detection based on adaptive fading Kalman filter in power systems

This paper presents an effective and feasible method for detecting dynamic load-altering attacks (D-LAAs) in a smart grid. First, a smart grid discrete system model is established in view of D-LAAs. Second, an adaptive fading Kalman filter (AFKF) is designed for estimating the state of the smart grid. The AFKF can completely filter out the Gaussian noise of the power system, and obtain a more accurate state change curve (including consideration of the attack). A Euclidean distance ratio detection algorithm based on the AFKF is proposed for detecting D-LAAs. Amplifying imperceptible D-LAAs through the new Euclidean distance ratio improves the D-LAA detection sensitivity, especially for very weak D-LAA attacks. Finally, the feasibility and effectiveness of the Euclidean distance ratio detection algorithm are verified based on simulations.     

Three-dimensional finite element analysis of geosynthetic-reinforced soil walls with turning corners

The paper presents in-depth three-dimensional finite element analyses investigating geosynthetic-reinforced soil walls with turning corners. Validation of the 3D numerical procedure was first performed via comparisons between the simulated and reported results of a benchmark physical modeling built at the Royal Military College of Canada. GRS walls with corners of 90°, 105°, 120°, 135°, 150°, and 180° were simulated adopting the National Concrete Masonry Association guidelines. The behaviors of the GRS walls with corners, including the lateral facing displacement, maximum reinforcement load, factor of safety, potential failure surface, vertical separation of facing blocks, and types of corners were carefully evaluated. Our comprehensive results show (i) minimum lateral displacement occurs at the corner; (ii) lower strength of reinforcements are required at the corner; (iii) higher corner angles lead to lower stability; (iv) potential failure surface forms earlier at the end walls; (v) deeper potential failure surfaces are found at the corners; (vi) larger numbers of vertical separations are found at walls with smaller corner angles. The paper highlighted the salient influence of the corners on the behaviors of GRS walls and indicated that a 3D analysis could reflect the required reinforcement length and the irregular formation of the potential failure surfaces.     

1 GWt PB-FHR负荷跟踪运行特性分析

为研究熔盐堆系统在商业应用中的价值，分析其是否满足电网负荷的变化需求和安全运行的能力，本文以1 GWt球床式氟盐冷却高温堆（PB-FHR）为研究对象，仿真计算其在负荷跟踪模式下的瞬态行为和运行特性。以RELAP5/MOD4.0程序为研究工具，并植入相关的熔盐物性与计算关系式，建立氟盐冷却高温堆的热工水力系统与功率控制系统的仿真模型，对典型负荷工况参数变化情况下控制系统的响应特性进行仿真分析。结果表明：该氟盐冷却高温堆系统在设计的控制逻辑的调控下，展示出良好的负荷跟踪运行能力，堆芯功率能迅速响应负荷变化，功率超调和温度超调小，反应堆的运行参数始终处于合理的运行范围内。     

蛋类礼盒包装结构的缓冲性能研究

目的研究蛋类礼盒包装结构的缓冲性能。方法以蛋类尺寸为基础,建立可发性聚乙烯(expandable polyethylene. EPE)缓冲单元结构和组合结构,进行静态仿真分析和实验验证,比较结构在形状、叠合层数、组合形式等参数变化时的载荷与位移。结果结构层数变化相同时,单元结构的极限载荷从143N增加到236 N,组合结构的极限载荷从224 N增加到476 N,均呈近线性增长。结论蛋类礼盒包装中,组合结构的承载能力优于单元结构,通过单元结构的组合,可满足不同蛋类的包装要求。     

Uplift capacity of horizontal anchor plate in geocell reinforced sand

The paper investigates the uplift performance of horizontal anchor plate in geocell reinforced sand through a series of model tests. It is noted that the unreinforced anchor plate undergoes a clear failure at a displacement of about 3% of its width, whereas with the provision of geocell and a layer of geotextile right below the geocell mattress significantly increases the uplift capacity by about 4.5 times higher than that of unreinforced sand and could sustain anchor displacement of more than 60%. Results indicates that the geocell mattress by virtue of its rigidity distributes the uplift load in the lateral directions to a larger area, thereby reducing the stress in the overlying soil mass and hence increases the performance of anchor plate system. The provision of the additional geotextile layer right below the geocell mattress is found to be very effective in increasing the stiffness as well as load carrying capacity of anchor plate system. The optimum size (i.e., width and length) of geocell mattress giving adequate load carrying capacity of anchor plate is found to be 5.4 times of anchor width (5.4B). The comparison of model tests results with 3D numerical analysis shows good agreement, indicating that the proposed model is able to capture the uplift load-displacement behaviour of geocell reinforced anchor plate system.